To the rear, 30
inches. Measured from
the centerline of the rear housing to the centerline of the
transponder. On the passenger (rt) side.
On the rear side of the rear
motor plate. On the passenger (rt) side.
To the rear,
30 inches. Measured from the
centerline of the rear housing to the centerline of the
transponder. On the passenger (rt) side.
To the rear,
24
inches. Measured from the centerline of the rear housing
to the centerline of the transponder. On the passenger (rt) side.
To the rear,
24
inches. Measured from the centerline of the rear housing
to the centerline of the transponder. On the passenger (rt) side.
General
Mounting Instructions
All
transponders will be mounted on the passenger (rt) side. Use your
skill to make the necessary mount.
Mount as low as possible, slightly above the lower frame rail or the
lowest protected point. 24" is the maximum, but should be avoided to keep a strong
signal.
Your measurement should be accurate to less than 1/2 inch.
Avoid or protect from exhaust heat.
Mount securely; you don't want it to fall off during the race.
The centerline of the transponder will be the arrow on the body or on
the bracket. The arrow shows the mouning direction.
